Products
2차메뉴
3차메뉴
Leading Light
Leading Light
Installed in places where it is necessary to safely guide ships attempting to enter complex, artificially created routes, or naturally occurring narrow waterways.
Lighting devices at the front and rear of the use section must be maintained so that navigators can perceive the same brightness.
Each module installed in the lighting fixture is manufactured with an individual SMPS built-in, and the system is formed by connecting AC power and communication cables.
It is configured so that even if a failure occurs in the control panel or control system installed at the bottom, the LED lighting of the lighting fixture is not affected.
The SMPS and control board are built into individual modules so that they can be attached and detached from the back, and are manufactured so
that there are no problems with waterproofing.
An LCD window is placed on the front of the control panel for intuitive use and controls the status and brightness of the module.
Lighting devices at the front and rear of the use section must be maintained so that navigators can perceive the same brightness.
Each module installed in the lighting fixture is manufactured with an individual SMPS built-in, and the system is formed by connecting AC power and communication cables.
It is configured so that even if a failure occurs in the control panel or control system installed at the bottom, the LED lighting of the lighting fixture is not affected.
The SMPS and control board are built into individual modules so that they can be attached and detached from the back, and are manufactured so
that there are no problems with waterproofing.
An LCD window is placed on the front of the control panel for intuitive use and controls the status and brightness of the module.
- Installed in places where it is necessary to safely guide ships attempting to enter complex, artificially created routes, or naturally occurring narrow waterways.
- Lighting devices at the front and rear of the use section must be maintained so that navigators can perceive the same brightness.
- Each module installed in the lighting fixture is manufactured with an individual SMPS built-in, and the system is formed by connecting AC power and communication cables.
- It is configured so that even if a failure occurs in the control panel or control system installed at the bottom, the LED lighting of the lighting fixture is not affected.
- The SMPS and control board are built into individual modules so that they can be attached and detached from the back, and are manufactured so that there are no problems with waterproofing.
- An LCD window is placed on the front of the control panel for intuitive use and controls the status and brightness of the module.
- Consists of 16 LED modules per module
- Satisfactory chromaticity for AtoN
- Built-in individual SMPS inside the module
- Each module is controlled by RS485 communication method
- Brightness and ON/OFF of each module can be controlled remotely
- Individual LED modules can be easily attached and removed
- Built-in protection circuit to prevent overcurrent
Light Characteristics
- Light Source Power LEDs
- Available Colors Green
- Candela(cd) 14,000 >
- Vertical Divergence(degrees) 5~6°(Variable)
- Horizontal Divergence(degrees) 3~4°(Variable)
- Flash Characteristics Fixed (Variable)
- Nominal Voltage / Watts AC 220V / 50W <
- Temperature Range -30 to 60℃
- Degree of protection IPX6
- Size(mm) 280 x 280 x 120(H)
- Weight(kg) 12